Aqua Master Tools® Aqua Master E50 Pro – Replacement Probe (Electrode) – 6919669153857

Suitable for the EC Temp meter E50 Pro. Please refer to the User Guide for instructions on how to replace the electrode. Waterproof IP67.

Replacing the electrode:

• Properly unscrew the sealing ring in the lower part of the meter
• Remove the defected/old electrode by gently pulling it
• Carefully place the new electrode with the recess in the correct position so that the connectors properly connect and do not damage the meter or electrode
• Check that the rubber seal is properly placed
• Tightly tighten the sealing ring
• Calibrate the meter as described in this manual
• The meter is now ready for use